 |
Decalin DeeCarb “ONCE-A-YEAR” additive.
Once a year dose: 5 ounces per 10 gallons
Maintenance dose: ½ ounce per 10 gallons
Potent combustion chamber, inlet valve stem, fuel injector cleaner
additive.
- Rough running when cold? Poor fuel consumption? This product
contains the industry standard for cleaning up engines.
- Use it once
a year at high dosage or at low dosage for maintenance or both.
- Safe
in the cockpit. You can carry it with you for out-of-town
airports.
- Easy to use graduated measuring and dispensing reservoir
built into the bottle. No messy syringes!
- Tested and stable
down to 0 degrees F.
- EPA listed ingredient approved for auto gas applications.
|
Notes on using Decalin DeeCarb: The Chemical Decarbonization
Process
The
symptoms of an engine needing "DeeCarb" are hard starting,
rough running when cold, low compression and high fuel consumption.
For
such engines, start with a high dosage and run the whole tank of gas
through the engine. Then drop to a maintenance dosage. If no improvement
is seen, then you should look for mechanical problems in the engine or
carburetor.
In auto engine conversions this additive works especially
well. One documented case showed a marked improvement in compression,
easier starting and much smoother running when cold.
Decalin DeeCarb is
not approved for use in the engines of certified aircraft, but the active
ingredient is listed with the EPA and approved for use in auto gas. No
harm has been observed in engines using this additive. |